types of fence fence
The fence base is manufactured and used in different types. The most widely used fence metal pipe is in Iran. It can also be concrete or wooden depending on the weather and climatic conditions. Here we briefly explain these products:
base of metal or iron fence
This is made of galvanized or black steel and iron. Black scaffolding or corner profiles and iron cans are also used to make the product. The standard height of these metal bases for non -wireless fences is about 2.5 meters and in cases where the barbed wire is installed above the metal fence, the height of the fence is 3 meters.
The distance between these fence iron bases should not be so far that the fencing is tilted. And to be swollen and not close enough to cost the fence around the garden or the land. These distances are basically determined by the specialist and are about three to four meters.
The benefits of using a fence metal base are convenience in installation and implementation as well as cheap prices and high resistance.
The disadvantages are its easy theft. The relatively high price of the fence iron pipe has increased the risk of stolen this metal product.
To fix this problem, the part of the metal pipe and chopper can be fastened by concrete.
Concrete Fen Base
This product is made of reinforced concrete and is very strong in terms of endurance. This concrete scaffold base is produced in prefabricated workshop. The weight of this concrete beam is very high and this makes it safe from theft. The fence of the garden fence is mostly used to create scaffolding in grape gardens and such. But it costs a high cost and installation. It is also much higher than metal and wood type.
wooden fence
The most traditional type of fence is its wooden type. The application of this type goes back thousands of years. You may have seen them in rivets and garden in rural areas. This type of base has a much lower resistance than metal and concrete type and is used only in areas where wood is abundant and cheap.
The Importance of Metal France Base
weak fence pipes lead to poor fences. If the fence terminal bases are too thin, too short or shallow, they can be tilted under the pressure of mesh weight and horizontal bases and natural waste, tilted or out of the ground.
a solid base, Strengthens the fence and guarantees that it is in good condition for the coming years. The best types of lace fence or garden are the ones that can easily resist the twist.
What is a garden fence base?
The fences are large bases made of wood or metal or concrete and are placed on the ground for the strength of the fence. These stands act as scaffolding to draw the structure and environment of the fence as well as tolerance of total fence pressure.
For horticultural lace fence, these fence bases are often made of galvanized iron or steel. Corner posts and gate posts. They are usually taller and larger than line posts. The bases of the vertical support structures are for fence mesh that are usually 3 meters or less apart.
Features of fence lace
The basic type of fence fence fence
Post fence may be corner post, linear fence and gate post. As the name implies, the corner columns are placed in the screw of an environment. They should be able to keep the pressure that is applied in two different directions.
France posts end the installation of the open fence, while gate posts have additional features to move people, animals or equipment. Gate posts can be designed for automatic doors, handheld gates, 1 -meter single gates or 6 -meter double gates.
Length and height of the fence and tube
Since fence posts need to support the entire fence, one end must be buried safely underground. The foundation depth depends on the features of the installation area. , For example, sandy or soft soils need more depth.
diameter and thickness of the metal fence lace
France's metal bases should be thick, 5 inches or 6 inches in diameter to create a solid base for heavy fences. They must be sturdy enough to resist the stretching of the wired lace on the bases.